GAMBIA preferred HUM technologies in its new investment
A contract was signed between HUM and GAMBIA's largest groundnut organization group for the investment of 300 tpd Groundnut Crushing Plant.
The plant will be commissioned in 2020.
A contract was signed between HUM and GAMBIA's largest groundnut organization group for the investment of 300 tpd Groundnut Crushing Plant.
The plant will be commissioned in 2020.
The growing company of Belarus preferred HUM for its new Rapeseed Pressing Plant investment.
The project is progressing rapidly and will be commissioned at the beginning of 2020.
Flaker, Screw Press and Equipment of Refinery Plant have been shipped to one of the major companies in Uzbekistan.
All the equipment were produced in HUM Workshop in Aegean Free Zone/Turkey.
Another landmark in Ukraine! : 700 ton/day capacity soybean Solvent Extraction Plant has successfully started up by "HUM" in February 2019.
200 ton/day Water Degumming Unit has shipped to Bulgaria. Equipment was manufactured in the production plant of “HUM” located at Aegean Free Zone.
“Fats and Oils Istanbul 2018” was successfully held at Hilton Bosphorus Hotel with participation of leading companies in edible oil business in Turkey. HUM came together with clients by opening a stand at the exhibiton.
HUM was at Astana / Kaz Oil Conference 2018. Managers of HUM gathered with the leading companies of Kazakhstan's oil sector at the event.
500 ton/day Solvent Extraction Plant of Orucoglu Oil Co. has been successfully commissioned by HUM. In September 2017, Oruçoğlu had assigned HUM for the construction of its new plant. Both companies are proud of their second completed project together after 22 years.
HUM gathered with the Ukrainian edible oil sector at “Fat and Oil Industry” Conference in Hilton Kiev. Regional manager Mr. Mubariz Shyrinov represented the company by opening a stand at the exhibition hall.
The equipment of Solvent Extraction Plant with 500 ton/day soybean processing capacity is being shipped to Ukraine from HUM’s production plant in Aegean Free Zone/ Turkey. The installation of this investment, which is one of Ukraine's leading oil companies’, has been started.
300 ton/day capacity crude oil plant equipment has been shipped to one of the leading oil companies in Sudan. The equipment include HUM Crusher, Flaker and Oil Screw Press were manufactured in the “HUM” production plant, located at Aegean Free Zone/Turkey.
ŞENPİLİÇ Co., one of the leading food companies in Turkey, ordered 180 ton/day capacity Final Oil Screw Press from HUM for its new investment: “Low Fat Soybean Production Plant”. The NYP60-F model screw press will be delivered in November 2018. We would like to thank Şenpiliç for choosing HUM.
HUM opened its first branch in Eastern Europe in Kharkiv,Ukraine! In June 2018, Mr.Mubariz Shyrinov has been assigned as regional manager and he'll now manage HUM's operations in Ukraine & Eastern Europe.
150 ton/day capacity NYP15 Oil Screw Press and NYT 24-7 Cooker have been delivered to Uzbekistan. The company ordered a NYP15 model Oil Screw Press and a NYT 24-7 Cooker as part of its modernization project and capacity upgrade in its Uzbekistan plant. The eqiupment were manufactured in the production plant of HUM located at Aegean Free Zone.
“Fats and Oils Belgrade 2018” was successfully held at Hilton Belgrade Hotel with participation of leading companies in edible oil business. HUM came together with clients from Balkan countries and other European oil companies by opening a stand.
HUM gathered with the feed industry at "13th Int. Feed Congress" between April 26th-29th in Antalya/Turkey. HUM attended the congress with its engineers, meanwhile presented its new technology: "Low Fat Soybean Production" at the exhibition.
HUM has developed a system for the production of high-protein, low-fat soybean meal which can be used both as a poultry feed and as a milk production yield enhancer.
The eqiupment consist of unique welding process, multi-layer hard facing, pure alloy on the final surface, high abrasion and corrosion resistance. The wear parts of screw presses (worms, collars, cage bars) are under the guarantee of HUM for 18 months in operation time.HUM collaborates with “T-1 ADA” company, which is specialized in corrosion and abrasion resistance spare parts manufacturing.
HUM was at PEOC Conference - Pakistan! "3rd Pakistani Edible Oil Conference” was successfully held at Karachi Mövenpick Hotel with participation of leading companies in edible oil business. HUM came together with Pakistani clients by opening a stand with its local partners.
5000 x 12 stage Cooker is ready to be shipped to Tunisia for Carthage Grains. This 1500 ton/day oilseed processing capacity cooker was manufactured in the production plant of “HUM” located at Aegean Free Zone.
On November 15th, “HUM” gathered with Pakistani oil producers in Karachi Mövenpick. The seminar organized by our representative Dr. Mian Khalil Ahmed - CEO of the Grains Industries Ltd. in order to introduce “HUM technologies” to notable Pakistani executives. Commercial attaché of Turkey - Mr. Murat Mustu also joined our seminar to support business activities between both countries. As HUM, we are looking forward to meet again with our followers in friendly nation Pakistan soon.
Bulgarian seed oil company: “AGRO PLANT INVEST” ordered 300 ton/day inlet capacity FS816 model 800x1600 FLAKER from HUM as part of their plant’s renovation and capacity increase works.
Negin Daneh Sahra Co. from Iran ordered NYP60 model 500 ton/day capacity Oil Screw Press from HUM as part of their plant’s renovation and capacity increase works. The equipment will be delivered in February 2018.
NYP60F HUM Oil Screw Press was delivered to Tiryaki Agro Company - Turkey. The company ordered the oil screw press as part of their plant’s renovation and capacity increase works.
HUM was at “Oilseeds & Vegetable Oils Conference 2017” which organized by BYSD (Turkish Vegetable Oils Manufacturers Association) on September 14. During the conference, notable executives from leading vegetable oil companies discussed crude vegetable oil production, oil consumptions and other topics.
"ProStorExpo: Fat&Oil Expo" was successfully held in 19-21 September at KievExpoPlaza - Kiev/Ukraine with participation of academia and leading companies in edible oil business. HUM came together with its clients by opening its own stand in the exhibition.
On 19-21 September 2017, HUM will participate International Agricultural Fair - "ProStorExpo: Fat & Oil Expo", which will take place at Kiev Expo Plaza (Kiev, Ukraine). We will be waiting our visitors at 49A booth!
ORUCOGLU OIL COMPANY and HUM signed a contract for 500 ton/day sunflowerseed cake & soybean processing capacity Solvent Extraction Plant investment. In 1996, HUM also builded company’s first solvent extraction plant in Afyon Province / Turkey.
The main equipment of 200 tpd capacity Solvent Extraction Plant (extractor, toaster) and 350 ton/day capacity HUM Flaker ordered by SUMY - Ukraine has been transported. The unit will be commissioned by the end of 2017. HUM provided middle term investment financing plan for this project.
350 ton/day capacity FS 816 HUM Flaker has been delivered to PAYMAR Vegetable Oil Inc. - Turkey. This newly developed flaker is produced with HUM quality.
300 ton/day capacity NYP30 Oil Screw Press has been delivered to Iran for Kimia Dane Company. The Iranian company chose HUM Oil Screw Press for their plant’s renovation and capacity increase works
300 ton/day capacity 2 x NYP30 Oil Screw Presses have been delivered to Bulgaria for BONOIL- Geostroy Engineering Ltd. On December 2016, the company ordered two NYP30 model Oil Screw Presses as part of its modernization project and capacity upgrade in its Bulgaria plant. The presses were manufactured in the production plant of HUM located at Aegean Free Zone.
On 13-15 April, our company will participate 3rd Edible Oil Congress of Turkish Lipid Group (YABİTED) in Hilton/ Izmir as an exhibitor and contributor of the organisation. Also, on April 12- 14:30, Mr. Serkan KIYAK from HUM will give a short course at “17th Practical Course: Advanced Technologies in Oilseed Processing” - in collaboration with YABITED Annual Meeting. In the congress, we will be waiting our guests at HUM stand!
Iranian company Kimia Dane Fars Edible Oil Processing Co. ordered NYP30 model 300 ton/day capacity Oil Screw Press from HUM as part of their plant’s renovation and capacity increase works. The equipment will be delivered in April 2017.
“Sumy Plant Foodstuffs” PJSC - Ukraine company and HUM made a contract for 200 ton/day sunflowerseed cake processing capacity Solvent Extraction Unit investment. The company also placed order for one FS816 model 800x1600 Flaker. Constituent parts of the unit will be delivered in August 2017 and the unit will be commissioned by the end of 2017. HUM will provide middle term financing plan for this project.
BONOIL/GEOSTROI ENGINEERING PLC ordered NYP30 model 300 tpd Oil Screw Presses from HUM as part of its modernization project and capacity upgrade in its Bulgaria plant.
Our company, HUM, received an honor award from MAIB (Machinery Exporters Association) for its service over 50 years in the machinery industry. We would like to express our thanks to MAIB for deeming us worthy of this award and paying tribute to our ongoing efforts. Also we are grateful to, notably our founder Mr. Halit UZUN and HUM family for their contribution to this success and endeavor.
According to the contract, signed between HUM and Ukraine company Protein Tech Invest LLC at June 2015, all the equipment including Cleaning, De-hulling, Conditioning, Flaking, Solvent Extraction Units have been already delivered and installation works began.
We will be waiting for our worth visitors in HUM stand at 15th International Conference “Fat and Oil Industry 2016”, October 26-27 2016, Odessa – Ukraine.
We will be waiting for our worth visitors in HUM stand at International Conference “OILSEED INDUSTRY”, October 27-28 2016, St.Petersburg – Russia.
The solvent extraction plant for Nasha Oliya-Ukraine is successfully commissioned after installment and assembling being completed. The plant was ordered in June 2015 and the equipment was delivered in January 2016.
The equipments, which were ordered in June 2016, will be delivered in February 2017. It is expected that the plant will be commissioned in the second half of 2017.
ELITE OIL and HUM shake hands for the state of the art 540 tpd capacity soybean crude oil plant investment. The plant includes preparation and solvent extraction units. HUM’s newly designed high capacity equipment, model KD313 Double Stage Cracking Mill and model FS821 Flaker, will be used in preparation unit. The new solvent extraction plant, which has 500 tpd soybean flakes input capacity, consists of HUM’s high efficiency and low consumption equipment.
Ukraine company GARANT, for his new crude oil plant investment, has already ordered to HUM his high capacity and efficiency equipments FS821 model 500 tpd capacity Flaker, NYP60 model 600 tpd capacity Edible Oil Screw Press, NYT35-9 model Ø3500x9 stages Cooker and 200 tpd capacity Solvent Extraction Unit.
Tiryaki Grubu Orta Anadolu Gıda chooses to buy HUM presses for their renewing proccesses in Çorum plant. HUM production 3 pcs. NYP15F model Final Presses will be used in the project.
Nasha Oliya Solvent Extraction Unit equipments, which were ordered at June 2015, were already delivered and handed over. The plant is expecting to commissioning at the second half of 2016
One of the long-established company of our edible oil sector -ALTINYAĞ A.Ş.- has already commissioned his new Crude Oil Plant and Solvent Extraction Plant, where high capacity and quality HUM equipments were used in.. FS821 model 500 tpd capacity Flaker and NYP60 model 600 tpd capacity Press are continue to running with their highest efficiency and quality.
HUM put his signature into another big project. According to the contract, signed between HUM and AVES at 25.06.2014; the complete plant, including Cleaning - De-Hulling - Solvent Extraction - Meal Grinding, was designed and supplied by HUM and was established as turn-key basis including project, buildings and installation works. The plant was commissioned by HUM engineers and supervisors and started to run.
As a part of a big value investment program, for extending and modernization of their production plants KLAS OLIO LTD and ZVEZDA AD companies have already commissioned NYP30 model 300 tpd capacity and NYP60 model 600 tpd capacity Presses and Cookers, sold by HUM.
The equipments, which were ordered in June 2015, will be delivered in January 2016. It is expected that the plant will be commissioned in the second half of 2016.
HUM signed under a big project in UKRAINE. The contract was signed on 16th June 2015 by Protein Tech Invest, LLC and HUM. The plant, which is comprised of cleaning, cold dehulling, conditioning, flaking, solvent extraction units, will be designed and supplied by HUM.. It is planned to commission the plant in 2016 season.
2nd Edible Oil Congress of Turkish Lipid Group (YABİTED) was successfully held on 7-9 May 2015 at Namık Kemal University Conference Hall- Tekirdağ Province with participation of academia and leading companies in edible oil business.
HUM came together with it’s clients and academia by opening it’s own stand in this conference and exhibition.
One of the basic companies of Edible Oil Sector ALTINYAG A.S. prefer HUM’s high capacity and quality equipments in their new edible oil plant investment.. They ordered to HUM KD313 model two-stage Crushing, FS821 model 500 tpd capacity Flaker, NYP60 model 600 tpd capacity Edible Oil Screw Press and NYT35-9 model Cooker.
As a part of huge investment for modernization and capacity increasing in their Bulgaria production plant, KLAS OLIO LTD ordered to HUM 1 pc. NYP30 model 300 tpd capacity Edible Oil Screw Press and 1 pc. NYT30-7 model Cooker.
HUM’s own design and one of the big project assembled in Ukraine, Complete plant, consists of Pre-cleaning, Drying, Silos, Cleaning, De-hulling, Pressing and Solvent Extraction units, has just begun to production.
HUM, which was founded by on 1960, MR. Halit UZUN on own project, where he has performed first installation and production celebrates 55 years anniversary of first oil facilities.
According to renewing works in Bulgaria plant, Zvezda AD has already ordered Screw Press, Cooker and Oil Foots Screen Tank to HUM. In this project, 1 pc. HUM’s new design 600 tpd capacity Screw Press will be used.
5thInternational Conference & Exhibition “Fats & Oils Istanbul” was successfully held on 3-4 December 2014 at InterContinental Istanbul hotel, with participation of 268 delegates from 16 countries.
HUM came together with it’s clients and new investors by opening it’s own stand in this conference and exhibition.
HUM signed under a big project in TURKEY. The contract was signed on 25th June 2014 by AVES and HUM. The plant, which is comprised of cleaning; dehulling; solvent extraction; meal grinding units, will be designed and supplied by HUM. The plant will be delivered by HUM on turnkey basis including building and installation works. It is planned to commission the plant in 2015 season.
OFI Oils & Fats International Turkey 2014 Exhibition and Conference event was eventuated successfully with a strong participation of our clients and investors.
We as HUM will be waiting for our esteemed visitors in our C6 stand in OFI Oils & Fats International Turkey 2014 Conference and Exhibition, which will be executed in Istanbul Congress Centre 13-14 May 2014.
REFINING PLANT, which consists of 400 tpd Neutralizing-Bleaching and 200 tpd Winterizing-Dedorising units, consigned to our company HUM by Trakya Birlik as a turn-key basis, was started up at December 2013 and begun to production. The official opening ceremony of the plant was done at 9 February with the participation of Minister of Customs and Trade Mr. Hayati YAZICI and Minister of Health Mr. Dr. Mehmet MÜEZZİNOĞLU.
200 tons/24 hours cake processing capacity Solvent Extraction plant, which was contracted between HUM and Agro Capital Group Ltd. in January 2013, was assmebled to Troitskoye - Ukraineby HUM.
Pre-commissioning of the plant were completed successfuly and start-up works are going on nowadays.
2.000 tons/24 hours Soybean and 1.500 tons/24 hours Sunflower seed processing capacity Complete Crude Oil Processing plant (Cleaning-Conditioning-Dehulling-Prepressing-Solvent Extraction-Degumming), which was contracted between HUM and NOBLE in February 2012, was assembled to Standerton - South Africa by HUM. Pre-commissioning of the plant were completed successfuly and start-up works are going on nowadays.
HUM, as a participant and sponsor of “12.International Conference Fat-and-Oil Industry” which is done in Kiev, Ukraine at 27-28 November 2013, will be waiting for the visitors for wellcoming.
According to renewing works in Moldovia plant, Trans-Oil Group has already ordered Screw Presses, Cookers and Oil Foots Screen Tank to HUM. In this project, 2 pcs. HUM’s new design 600 tpd capacity Screw Presses will be used.
HUM, participated to AOCS Oils and Fats World Market 2013 Kiev/Ukraine Conference & Exhibitionby erecting a stand.
The first project of 2013 SEÇER TARIM, founded in Tarsus 450 tons/day capacity sunflower seed processing Crude oil Plant Pre-pressing Unit and Solvent Extraction Unit was handed over at August 2013 and started-up at January 2014 by completing the installation.
Assembly of the crushing plant with a sunflower processing capacity of 500 tons/day at Altınekin was completed and trial production started in November 2012.
HUM signed under a big project in Ukraine. The contract became into force after it was signed on 30th July 2012. The plant, which is comprised of pre-cleaning, drying, silos, cleaning, shelling, prepress and solvent extraction units, will be designed and supplied by HUM. Equipments will be delivered in May 2013.
The contract was signed on 4th July 2012 and became effective. The plant, which is comprised of Cold Neutralization and Bleaching units of 400 tons/day capacity and Winterization and Deodorization units of 200 tons/day capacity, will be delivered by HUM on turnkey basis including building and assembly works.
It is planned to commission the plant in September 2013, which the equipment delivery and assembly shall start in February 2013.
NOBLE, one of the global giants chose HUM for its giant project in South Africa. The contract was signed on 1st February 2012. Deliveries started in October 2012. Assembly will start in January 2012. The plant has a sunflower seed processing capacity of 1.500 tons/day. Entire plant, comprised of cleaning, conditioning, shelling, prepress, solvent extraction and degumming units shall be designed and supplied by HUM.
EFKO, one of the biggest establishments of Russia assigned duty to HUM for its new investments. Soy plant contract was signed on 18th August 2011 and final acceptance was made on 14th September 2011. On 12th October 2012, a contract was signed for prepress unit with a sunflower seed processing capacity of 600 tons/day. The NYP60 Oil Screw Press of 600 tons/day capacity, which is the new design of HUM was used in this project with success. Trial production of the unit started in December 2012.
The HUM stand shall host its visitors at OFI MIDDLE EAST 2011, which will be held in Cairo on 13-14 September 2011.
The HUM stand shall host its visitors at OILSEED & OILS 2011 conference, which will be held in Istanbul on 22-24 September 2011.
The HUM stand shall host its visitors at FAT & OIL INDUSTRY 2011, which will be held in Kiev on 23-25 November 2011.
With the contract signed on 1st August 2011, HUM was awarded the contract for cleaning-shelling unit, solvent extraction unit, degumming unit and pulp pallet-cooling unit on turnkey basis. HUM shall provide such services like engineering, equipment supply, automation, electric works, assembly and commissioning. It is planned to commission the plant in July 2012.
The order for the complete plant, which is comprised of shelling, preparation and solvent extraction, the first project of HUM in Egypt, was placed by El Shark in October 2010. All equipments of the plant were ready for shipment in August 2011. It is expected that forwarding shall start in September 2011.
Yonca Gıda preferred HUM again. They ordered the Solvent Extraction Unit with sunflower pressed cake processing capacity of 250 tons/day, in June 2011. The equipments of the plant will be delivered in March 2012 and the plant will be commissioned in 2012 season.
The deodorization unit, equipped with high technology for full automated and high quality edible oil production, was manufactured at HUM’s production facilities under its own engineering. Assembly of the unit’s equipments, which were delivered in April 2011, is in progress.
The prepress unit with a sunflower seed processing capacity of 600 tons/day was ordered on turnkey basis including the services of engineering, equipment supply, assembly and commissioning. This unit was added to the existing soy plant, thus it is now possible to process sunflower seed and canola processing.
Doğa Gıda chose HUM again and ordered Solvent Extraction unit with soy processing capacity of 300 tons/day for Menemen plant. The equipments of the plant will be delivered at the end of October 2011 and it is expected that the plant will be commissioned at the beginning of 2012.
The oil presses with sunflower seed capacity of 300 tons/day each, which HUM has recently developed, were delivered in July 2011. Also, the equipments of the solvent extraction unit with sunflower press cake processing capacity of 200 tons/day were delivered in April 2011. Assembly of Havran facilities is almost complete and will soon be commissioned.
HUM, participated to Oil & Fat 2011 St. Petersburg as sponsor.
It will be a plant equipped with high technologies for producing full automated and high quality edible oil, which is comprised of neutralization, bleaching, winterization and deodorization units. The equipments, which were ordered in March 2011, will be delivered in February 2012.
The equipments, which were ordered in March 2011, will be delivered in December 2011. It is expected that the plant will be commissioned in the first half of 2012.
HUM, which was founded by on 1960, Mr. Halit UZUN on own project, where he has performed first insallation and production celebretes 50 years anniversary of first oil facilities.
The commissioning and performance tests made in November 2009, of the Sovent Extraction plant with cake capacity of 500 tons/day, of which erection was completed in Buzau-Romania, were completed with success and the final acceptance was made. BUNGE, a global brand, contracted HUM in November 2007 for the production of the Solvent Extraction Unit with 500 tons/day capacity of the edible oil production plant with sunflower seed processing capacity of 800 tons/day in Romania. HUM contracted turnkey delivery of the unit including engineering and equipment supply as well as assembly and placement.
The commissioning and performance tests of the solvent extraction plant with soy capacity of 300 tons/day were completed successfully in December 2008 and the final acceptance was made. The plant was ordered to HUM in July 2007.
December 2007. LURGI GmbH contracted HUM for the supply of numerous equipments of the extraction units at the MARTIFIER Romania project, which he had contracted on turnkey basis. The input capacity of the plant is comprised of two lines, e.g. canola of 1500 tons/day and soy of 1000 tons/day.
HUM contracted supply of equipments, piping and electrical materials beside the extractors and toasters of both plants. It is planned to commission this plant, which is the biggest vegetable oil project of Romania, in the first quarter of 2010.
The commissioning and performance tests of the prepress and solvent extraction plant with soy capacity of 300 tons/day or sunflower capacity of 400 tons/day were completed successfully in December 2007 and the final acceptance was made. The plant was ordered to HUM in October 2006.
The equipments of the complete crushing plant, comprised of preparation, shelling, prepress and solvent extraction units, with sunflower capacity of 450 tons/day and canola capacity of 330 tons/day, were delivered in June, July, October 2008. The plant was equipped with the most modern design, equipment and automation. Completion of assembly works is expected in order to commission the plant. The plant was ordered to HUM in May 2007.
Upon completion of the commissioning and the performance tests made following the assembly of the Preparation, Shelling and Prepess plant, with sunflower processing capacity of 700 tons/day, which HUM has contracted on turnkey basis, the plant was delivered in November 2006. This plant, which was equipped with the most modern design, equipment and automation, is the biggest sunflower processing plant of Turkey in capacity. The plant, which was ordered to HUM in April 2005, was completed in a short time, including construction and building works, and opened.
Upon completion of the commissioning and the performance tests made following the assembly of the Refinery-Winterization plant with liquid oil processing capacity of 200 tons/day, which HUM has contracted on turnkey basis, the plant was opened in December 2006 with a ceremony. The opening ceremony of the plant was made with the attendance of Mr. Ali Coşkun, the Minister for Industry as in the ground breaking ceremony. The plant, which was equipped with the most modern design, equipment and automation, deserves to be smart refinery. The plant, which was ordered in June 2004, was completed in a short time, including construction and building works, and opened.
Upon completion of the commissioning and the performance tests made following the assembly of the Refinery-Winterization plant with liquid oil processing capacity of 120 tons/day, which HUM has contracted on turnkey basis, the plant was opened. The plant, which was equipped with the most modern design, equipment and automation, was ordered in July 2007.
HUM completed the project of a plant from land until turnkey delivery. According to the contract signed between TARİŞ PAMUK and HUM, HUM has contracted project designing, production and erection of the crushing plant under turnkey basis, with oil seed processing capacity of 800 tons/day. The opening ceremony of the plant was performed with the attendance of Mr Ali Coşkun, the Minister for Industry, in December 2006. Award to HUM of the contract of this important project, which was started as part of TARİŞ investments, shall contribute much to the progress of a Turkish company who is at the same time a world leader in the sector.
Details of the Project:
Project subject : Crushing Plant with cotton seed processing capacity of 800 tons/day
Works to be completed : Infrastructure constructions, process plant construction, utility services constructions, seed silos constructions, storage tanks, process plants and process plants integration, commissioning.
HUM, participated to AOCS 2005 Salt Lake City – USA Annual Meeting & Expo by erecting a stand.
The detail engineering works, machinery and equipment production of the continuous extraction plant with cake input capacity of 200 tons/day, were made by HUM and the plant’s assembly is under progress. The plant, where the latest technologies shall be applied and which will be one of the most modern samples in the world, is the most important attempt within the competition in the sector of ARI RAFİNE.
HUM has completed the assembly of the largest capacity and the most modern plant of Kyrgyzstan and started trial operations. The machinery and the equipments of the plant, which were designed by Turkish engineers, were produced in Turkey. Choice of Turkey and HUM for this project, in spite of the proximity advantage of India and China, is an important success and sample. That award of the contract of the project to HUM with a contract price higher than those offered by Indian and Chinese bidders, proves appreciation of Europe conditions and quality that is offered by HUM to Europe in much more compatible prices.
Our south-eastern Anatolia now has a plant with the biggest capacity, the most modern and the highest technology in the region. The plant with cake input capacity of 400 tons/day was produced and assembled by HUM under Lurgi license. One of the distinguishing properties of this plant, is the added value, which was created with the realization of a such a big capacity project solely by Turkish engineers and labor.
The plant, which is being manufactured by the consortium, established with the participation of HUM MÜHENDİSLİK LTD. (HUM) and the German company Lurgi Life Science GmbH (LURGI), is being designed by LURGI technology, which is the leader in vegetable oil technologies in the world. Manufacturing and project application of some machinery and equipment of the plant, of which machines and equipments will be supplied by LURGI, shall be carried out by HUM, the Turkish Company, who has served vegetable oil sector for 40 years.
Manufacturing of the machinery and equipment of the plant, where the most advanced technologies shall be used, has started. It is planned that the plant, comprised of semi-continuous bleaching and deodorization units, with capacity of 200 tons/day, shall start production in the second half of 2003.
HUM sold continuous solvent extraction plant with a capacity of 200 tons/day to be erected at Shymkent, Kazakhstan. The plant, which will be earned to Kazakhstan by ARAY company, shall be manufactured by HUM under LURGI license. The plant, where the most advanced technology of the world will be used, will be a sample plant for Kazakhstan and region’s countries. Production of the machinery and equipments of the plant, where HUM technology and LURGI engineering shall meet, shall be completed within a very short time as 7 months. Following assembly works, it is expected that the plant shall start production in February 2003.
TARİŞ, which is established in İzmir for long years, and which is the Turkey’s largest olive-oil refinery, is renewing its olive-oil combined plant technology, machinery and equipments, and is being re-structured at İzmir Çiğli Atatürk Industrial Zone. The plant, which is being established by the consortium composed of HUM MÜHENDİSLİK LTD. (HUM) and the German company Lurgi Life Science GmbH (LURGI), shall be a physical and chemical olive-oil refinery plant with olive-oil processing plant capacity of 90.000 tons/year. The plant, where the most advanced technologies are used, shall rank among the most modern plants of Turkey and the world. The plant’s project is being designed by the German Company LURGI, a leader in the world in vegetable oil technologies. Renewal of the machinery and equipment, and application of the project is carried out by the Turkish Company HUM. The plant, which will be equipped by PLC control system and the most modern devices, will be capable to offer the best quality olive-oil with the least cost.